EXTERIOR
1. Inspect module for corrosion, damage
2. Inspect all door latches, handles, locks for proper operations
3. Inspect all exterior lighting for proper operation
4. Inspect all exterior lighting for cracked lenses or damage
5. Inspect rear bumper for damage
6. Inspect fenderettes, rub rails for damage
7. Inspect stone guards and kick plate for damage
8. Test shore line for proper function
9. Inspect all exterior compartments for damage
10. Inspect all door weather seals
11. Inspect all exterior compartment lights & door ajar circuits and switches
12. Inspect all drip rails
13. Inspect all module windows

INTERIOR
1. Inspect all interior lighting
2. Inspect module switch panel for proper function
3. Inspect 120V circuit for proper function per AMD Standard 009
4. Inspect medical 12 VDC outlets for functions
5. Inspect and test O2 system per AMD Standard 015
6. Inspect and test suction unit
7. Inspect vinyl flooring
8. Inspect all upholstery and padding
9. Inspect all plexi-glass sliding doors
10. Inspect all cabinet latches, locks, shocks, and hinges
11. Inspect interior laminates & head liner
12. Inspect front console switches and gauges for function
13. Inspect heater and air conditioner for proper function
*** Notify customer of all defects found not covered in contents with quote for repairs

MODULE REMOVAL
1. Evacuate and save freon from module and chassis
2. Drain and save antifreeze from module and chassis
3. Remove wiring from electrical control panel to old chassis
4. Remove front console and wiring for reinstallation
5. Remove module from chassis
6. Thoroughly inspect the under module structure and mounting points for corrosion, broken welds, and damage
7. Repair as needed
8. Prep new chassis to accept module
9. Install new mounting pucks or isolation pads
10. Install new cab to box seal and bolts
11. Install new EPDM Nomex heater hoses
12. Install new fuel fill hoses
13. Install new electrical harness in new chassis
14. Install new Whelen 500 series LED grille lights with chrome flange
15. Install new Whelen 700 series LED intersection lights with chrome flange
16. Install new cast products 100 watt siren speakers in the front bumper
17. Install new 1/O battery cables
18. Install 3 1/O braided ground straps
19. Evacuate and charge AC unit
20. Fill with new antifreeze
21. Hook up all electrical wiring
22. Single 8-10” Belt line on cab painted to match module
23. Star of Life decals 2=4” star 1 reverse ambulance
24. Install new diamond plate rear step bumper with flip up center section
25. Undercoat module
26. Remove all lighting from module box
27. Clean & wash module box, touch up small paint chips, buff & polish entire module box
28. Clean and polish existing lights and housings
29. Polish fenderettes
30. Install new Lonseal flooring – reuse Cot hardware
31. Install new diamond plate stone guards on the front and rear of module
32. Install new diamond plate rear kick plate
33. Install new diamond plate rub rails
34. Install new heavy duty diamond plate running boards
35. New hour meter
36. New Carson siren
37. New Phoenix SS wheel simulators with valve extensions
38. Clean and polish all compartments and entry door panels
39. Test all electrical systems for proper function
40. Road test for minimum of 50 miles
41. Weigh vehicle and certify for AMD / KKA-1822-F
42. Test heat/AC
43. Test electrical system per AMD 005
***Chassis quoted seperately